When you download the programs or applications in the Internet Explorer in Windows Vista, such downloaded files are placed inside the “Downloads” directory by default. This directory is in real situated at c:\users\Your_USER_NAME\Downloads.
If you want to make downloads as much easy to access as possible then you must do it only by situating a link to the folder of the download state directly from the start menu. On the other side, allow the Start Menu to expand up to a menu that displays each and every download, allowing you to have easy access to deletion and power options as needed.

How to display link or Menu to Downloads in Start Menu:

1. At initial step you will have to Right-click a vacuous area on the taskbar and choose “Properties”.

2. The “Taskbar and Start Menu Properties” windows will open up, which has so many multiple tabs inside it. After that, choose the option the “Start Menu”.

3. After that you need to choose the button named the “Customize”.

4. The dialog box named “Customize Start Menu” will open up. Underneath, the option “Downloads” choose either the “Display as a menu” option or “Display as a link” radio option.
5. Finally you need to click “OK” button to close the window in the end.

The above easy steps would guide you through the process to make downloads in easy access. For avid computer users it’s good to make programs or files in an easy reach and hence it’s always a better choice to change settings according to you.

In windows XP the Run option is by default available in the start menu but in Windows Vista this feature is not present by default as instead of Run option search box is present in the start menu. The search box is the place where you enter the desired topic and you will see the results if there are any.

For adding the run option you will have to make an extra effort by altering the administrative or registration settings.

How to Set the Run option in the Windows Vista Start menu?

1)      Just by right clicking on the Start button symbol select the option “Properties.”

2)  The properties dialog box opens up, from there go to the Start menu tab and select the “Customize” button.

3)  Now you just need to check out the option “Run Command” in order to enforce the alterations you have made.

4)  Select the OK button and finally click on “Apply” button.

5)  Now the Run command is present in the Start menu window and is within your reach.

In case you want to remove the “Run command” from the start menu, you just have to repeat the above mentioned steps and need to uncheck the Run option box. You are then done with it. Now, you can use your computer according to your needs and desires. Windows Vista has got so many features that you can’t resist to trying your hand on them.

There are so many people who have been searching around for the methods to remove the arrow along with the “shortcut” text from the Windows Vista shortcuts. Therefore there is proper guide to make you understand how to perform this operation.

This is surely a topic that is meant for the expert users on the Windows operating system who very well know how to make use of the registry editor, the below are the steps that are at most made really simple as much possible.

How to remove the arrow and the “shortcut” text from the Windows Vista shortcuts?

• Log on as an administrator. The next step is to download the defined archive and then extract it towards a folder as of your own choice.
• You will have three different files in the archive provided to you by the website providing solution to this problem. Those are “rem_shortcut_arrow.reg”, “rem_shortcut_text_from_machine.reg” and “rem_shortcut_text_from_user.reg”.
• In order to remove the arrow you will have to run the first file “rem_shortcut_arrow.reg” and then make out the right confirmations.
• In order to remove the “shortcut” text you will have to run the third file “rem_shortcut_text_from_user.reg” al for the current users.
• If you need to remove it for all the users then run the second file “rem_shortcut_text_from_machine.reg”.
• Restart your computer system and then log on, the result will be there for you.

Following the above steps would lead you through the process.

Windows Vista is the operating system that is automatically pre loaded with several mind blowing features but they all may not be helpful for your computer system. After Windows XP, Vista was released with so many features that would make any one fall for this platform. You have the right to optimize the computer system and can win over certain functions to be able to disable them which are otherwise not in use. Still many people don’t use all of the features and in this case it would be better to disable the unnecessary features.

Steps to disable unnecessary features in Windows Vista!

1. Select the Start button and then choose Control Panel.

2. Select the Programs icon.

3. The third step is to select the “Enable or disable” option for windows programs and features, under the same heading.

4. Then you will have to select the “Continue” tab.

5. After the above step, the list of the features present in the system will be shown. You have to uncheck the boxes of all those features that you do not want to use. For an instance, you can uncheck the box of Tablet Pc in case you do not have that or can also uncheck the games box if you are not using Windows games prior DFS Replication Service and so on. The choice is entirely yours.

6. Finally, Select the OK tab when you are done with it. You can again recheck them if the need arises.

Many times it occurs as if you have done nothing to protect your documents, files, folders, and other sensitive sections and information even after having the updated and installed anti-spyware and anti-virus. You may also have a firewall in perfect condition but still feeling a little unprotected. Do not worry; you can do one more thing to protect your files that is “Encryption”.

In case you have preinstalled Ultimate, Enterprise or Business edition of the Windows Vista on your PC or laptop then you can easily make use of the Encrypting File System in order to make your most substantial documents completely safe and secure.

Here are some steps on how to encrypt files in Windows Vista?

• The initial step is to navigate on to the file or the folder that you want to encrypt for protection purposes.
• Then right click on the file or the folder and select option “Properties”.

• Select the “Advanced” button in order to bring the “Advanced Attributes window”.
• The other step is to select the check box present next to option “Encrypt contents to secure data.”

• Then click on the button OK in order to return to the Properties dialog box and then again select OK button.

The Windows Vista is the operating system having newest feature of “hybrid sleep” for the laptops.  It also has a new feature of “Sleep”.

The Hybrid sleep option actually saves the Operating system to state into the RAM but it also writes all information into the hard drive too. This actually assures that when the power is lost then also the data will not be gone.

How to disable hybrid sleep mode in Windows Vista?

• Initially open up the options for power settings from the Control Panel and then choose the “Change plan settings” link that is present beneath the chosen power plan option.

• In the resultant window, select “Change advanced power settings”. This is the time you will have to scroll via miles of choices in order to search out for “Sleep” mode. Just expand this option and then select it’s underneath option “Allow hybrid sleep” node.
• After this you will have two options, “Plugged in” and “On battery”.  You have to set both of them off.
• After completing this, click on “OK” button and you are ready with your settings.

Now after following these steps, the laptop will go into “Sleep”. If the laptop is not in use for few seconds or the lid has been shut down, then the laptop will actually enter into complete sleep mode instead of hybrid sleep.

isn’t it easy to turn your pc settings to “Sleep” rather then sticking with the “Hybrid sleep”?

In case you are a user who is encountering a trouble of slow processing or slow running of certain program or application on your Windows Vista operating system then you must alter up the procedure priorities in order to Tune the system. In case some program or process is lesser important but still taking so much of time of the Central Processing Unit then you will be able to lessen the priorities and as per your desire push the more significant process.

How to change Process Priorities to Tune Your System:

1. First, Right-click on a vacuous area of the taskbar of the Windows Vista.

2. After this step select “Start Task Manager”.

Moreover, you have the right to skip up these two steps and simply press Ctrl + Shift + Esc combination to open up the real Task Manager.

3. “Windows Task Manager” dialog box will open up. You must assure it that the “Applications” tab is chosen by default otherwise choose it your self.

4. In case the process which you wish to alter is in real linked and related to application then just right-click it and select “Go to Process” as soon as the popup menu appears.

5. Otherwise, click the “Processes tab” in order to search a process which you wish to alter.

6. Then the other step is to Right-click a process and then click on “Set Priority” button.

7. Select any priority from following priorities from highest to lowest:
* Realtime
* High
* Above Normal
* Normal
* Below Normal
* Low

8. Finally click on to the “Change priority” tab.

The Taskbar of the Windows Vista is quite larger than the other previous versions of the Windows. When the screen’s real estate is actually at a bounty as in the case of few netbooks, you may wish to hide the taskbar when ever it is not in use in order to supply more viewable space for the open programs and applications. It’s a better option to automatically hide the taskbar when you are working on some programs/files or any window is open as you can have more viewable area.

Note: By doing so you will switch between the windows like as clicking on to the Windows by utilizing Win + Tab or Ctrl + Tab.

1. Initially, Right-click a vacuous area on to the taskbar and choose option “Properties”.

2. After this a window naming “Taskbar and Start Menu Properties” will popup. You must click on to the “taskbar” tab for sure.

3. Beneath, the “Taskbar appearance” option and check on “Auto-hide the taskbar”.

4. In order to close the dialog windows just click on “OK” button.

After performing the above steps the result will be:
When you will take away your mouse pointer from the Taskbar, what you will see that it will slide out of your view means will hide. In order to bring the taskbar back, only move your mouse pointer towards the edge of the screen where in the Taskbar is situated and the taskbar will come into view again.

Many times when you work as a Network Administrator you generally receive a home user’s computer system and need to pause for some seconds in order to receive the Administrator applications which you make use of in order to provide solution to the day to day problems that are regularly encountered by the users themselves. There is an easy way to place the administrative tools directly into the Vista Start menu.

To add Administrative Tools to the Vista Start Menu!

1) The first step is to Right-Click on to the Start Button, and from there select the option Properties

2) From the Start Menu Properties dialog box click on the Customize button.

3) Then you just need to scroll down into the menu list and you will get to see content for System administrative tools.

4) After that alter the radio button in order to Display All Programs option along with start menu.

5) You will have to twice click the OK button for the completion of the task.

The result is that all types of administrative tools are now present at the fingertips and that also with some mouse clicks only. This way you are done with the process in 5 simple steps.

Windows Vista has new features that would make your computing experience worth while. Learn all about Window Vista and its tricks in order to have your pc optimized for your own self.?

Windows Vista has a feature named Ease of Access Center in order to permit the user to disable some features which are not in use for the user. You have the right to configure the features of Vista on how to magnify the text and on-screen objects, change the narrator to read in a loud manner the on-screen content; to make adjustments to the contrast to have easy view on screen and to teach the operating system to be able to recognize the different voice commands.

Get to know the Ease of Access Center:

• Open up the Ease Of Access Center dialog box by clicking on to the Start button, then to select the Control Panel, and finally double clicking the Ease of Access Center in the Classic view.
• Click on to “Make the Computer Easier To See” link.
• You will have view of options to improve the looks of the content on-screen in the resultant window pane. To increase the on screen content value click on to “Turn On Magnifier” checkbox.
• After that click on the “Apply” button.
• Now you can easily configure how much you want to magnify the dock.
• You can also situate the window on to the left, right, top and bottom of the screen.

There are so many new features in the Windows Vista that you can’t even imagine. What’s better than your pc optimized for you completely? Watch the space for more Window Vista tricks.